Removable keypad for GV-AS200 programming. It can be connected to GV-AS200 controller by flat cable and multi way connector provided. It is very useful during installing to program controller ID, password and controller working mode. It not allows to input codes for access. Product not available any more.
Basic intercom of Project series, white, for digital DF6000 sytem with reduced number of wires (2 wires). Complete with door opener button, with integrated decode module and jumper address selection. Call from landing by means of SR41.
Colour camera with reduced dimensions, equipped with 1/3" CCD sensor. In day time it provides a colour image. When the light decreases the image provided is B/W and a photocel turns on the 12 infrared LED in order to increase the sight possibilities. It can be installed in outdoor (IP67 protection degree). It is provided with bracket and sunvisor. Out of production.
Key holder like transponder for access control. Working frequency 13.56MHz. Product not available any more.
This device allows the connection of any kind of analogue push button panel to Profilo / Agoà encoder modules of Farfisa digital systems (DUO system, FN4000, DF6000). Each board can connect up to 16 buttons and it is possible to connect boards in chain.
Extendable intercom, for additional or intercommunicating functions. Suitable for 4+1 intercom with alternate current call systems and for digital FN4000 system. Complete with electronic microphone, buzzer, spiral cord and 2 buttons expandable to 10 for door-lock release, intercommunicating calls and various services.
TXWEB/1 transmitter allows to be connected to a video signal from any CCTV device, even existing. In this way it is possible to display the video signal by a remote PC through the TCP/IP network connection. Based on MPEG-4 compression with CIF resolution, by the provided software, it allows to make all the settings related to resolution, frame rate, PC recording (on various mode), image displaying or e-mail sending. It is also equipped with 2 input/output alarm interface and a RS-485 port. The product is provided with a power supply. Product not available any more.
RFID ISO card 13.56MHz for access control. Product not available any more.
