Proximity reader "stand alone", RFID unit, in one module of Profilo range, made in aluminium. Supplied with two relays with programmable timer according to the features of the connected device. The programming is made through a master card managed by a display and front LED's that indicate also data insertion of the enabled cards. Memory capacity is 500 cards, therefore ideal use is access control of complex buildings or communities. It is provided with 4 cards + 1 master card.

Until stocks last.

Fixing bracket on the wall for KM8162W for DF6000 digital systems.

Videointercom integrated with decoding module for DF6000 digital system, supplied with door-lock button and further 2 buttons for auxiliary services, it allows call from landing. It needs WB8162 wall bracket.

Intercom for DF6000 digital system simplified wiring (2 wires). Supplied with button for door-lock with integrated decoding module by adding ST701 accessory.

Hand-free compact monitor Echos series, metallized colour. 3.5" LCD screen adjustable in horizontal haxis for a better visualisation against light reflex and for the different requirements for user's height. Once the activation button is pressed, the communication without the traditional handset is possible. It is supplied with buttons for door-opening, screen switch-on, bell exclusion (with LED for indication of the present setting), volume adjustment, picture brightness and further 6 buttons for intercommunication service and additional functions. For digital Duo System Color.

B/w videointercom Exhito series with 4" screen and with 7 buttons (auto switch-on, electric door lock and further 5 for auxilliary services that can be intercommunicating calls) with electronic call technology. The monitor is white and outside the screen it is grey. It can be installed in system with conventional wiring, reduced number of wires, or digital FN4000 or DF6000 systems depending on the wall bracket choosen. Out of production

Wall bracket for EX3100C and EX3160C videointercoms in systems with conventional wiring with coax cable.

Wall bracket for EX3160C and EX3160 videointercom in system with raeduced number of wires.

Colour videointercom Exhito series with 4" LCD screen and with 7 buttons (auto switch-on, electric door lock and further 5 for auxilliary services that can be intercommunicating calls) with electronic call technology. The monitor is white and outside the screen it is grey. It can be installed even in systems with conventional wiring or reduced cabling, or digital FN4000/DF6000 systems according to the wall bracket used.

Available unitl stock lasts.

Passive coax to UTP converter. It allows to convert unbalanced video over coaxial cable to a balanced one to be transmitted over UTP cables (as transmitter). It can be used also as receiver to convert UTP signal to coaxial. According to cable performances up to 600m with B/W signal and 400m with color signal can be covered. It is equipped with male BNC connector so it can be installed on the rear of the camera or monitor, while 20cm cable with terminal screws are provided for UTP connection. Product not available any more.