Wall bracket with terminal boards for electrical connections and wall mounting of KM8262W monitors.

Compact videointercom for DUO System, with 4" b/w flat tube for wall surface mounting. It is equipped with three push buttons for electric lock release, auto switching and intercommunicating service. The intercommunicating call is possible between other monitors or intercoms; call from landing is allowed.

Keypad for access control that can be surface or flush mounted, thanks to the various accessories. Front panel in anodised aluminium and buttons in stainless steel, suitable for any PROFILO push button panel configurations even for video systems. It's equipped with 2 relays for door opener or other facilities activation. The keypad is also for programming and setting relay enable codes. To prevent any strange use deactivation, with increasing time intervals (max. 30 sec.) in case of wrong combination is implemented. The programmable individual codes can be from 1 to 8 digits for each relay. Programmable timer from 1 to 99 sec. in mono stable or bi stable operation of relay 1. Basically conceived for outdoor use it can be used of course also for inside. In the picture the article is mounted together with PL71.

High performances color camera. Thanks to SONY ExView CCD sensor with HQ1 DSP technology allows to get high reliability and high image quality also in low light conditions. Controls: DC or Video autoiris lenses, BLC and White Balance. Out of production.

One-way videointercom kit with coax cable technology and electronic call. It is composed by LCD Echos series intercommunicating videointercom white colour with grey buttons and door station Profilo series. 

Optioal card for I/O interface and RS-485 port for pc-based surveillance devices based on GV-800/4, GV-1240/8 and GV-1480/16 compression cards. It provides 4 inputs contacts to dynamically manage alarm events, record triggering, e-mail and SMS sending, event display on e-map, etc... Moreover, 4 relay output contacts (programmable NO or NC in various modes) can be used to control external devices. RS-485 port allows to control PTZ cameras (the most common PTZ protocols are supported). Provided with RS232-RJ11 cable and USB-RJ11 cable for PC connection. Product not available any more.

This DVR card allows to build up powerful PC-based surveillance with enhanced capabilities and high end performances systems. Thanks to specific hardware and software design it allows to record up to 16 audio and video channels (using MPEG4 ASP or advanced H.264 compression algorithms, up to 400Fps) and make intelligent surveillance of wide areas. It supports new functions like missing or unattended objects detection, dynamic event management with e-map... Moreover, thanks to supporting a lot of network functions it allows real time network surveillance even via PC, PDA or 3G mobile phone, and also to make remote system maintenance. It can be provided with assembled PC hardware. Product not available any more.

This DVR card allows to build up powerful PC-based surveillance with enhanced capabilities and high end performances systems. Thanks to specific hardware and software design it allows to record up to 8 audio and video channels (using MPEG4 ASP or advanced H.264 compression algorithms up to 200Fps) and make intelligent surveillance of wide areas. It supports new functions like missing or unattended objects detection, dynamic event management with e-map... Moreover, thanks to supporting a lot of network functions it allows real time network surveillance even via PC, PDA or 3G mobile phone, and also to make remote system maintenance. It can be provided with assembled PC hardware. Product not available any more.

12Vdc / 400mA power supply for camera in CU260 or CU310 external housing. Product not available any more.

Die-cast aluminum with 100 watt illuminating power, with lamp and 850 nm optical filter. It allows to illuminate with an infrared light up to 17 meters (10° beam's aperture). Power supply through APS129. Out of production.