CCD colour camera module, with infrared LED's. For videointercom digital FN4000 systems. It allows, during the installation, to be adjusted +/-30° horizontal and vertical. It is of Mody push button series which accessories can be used with this camera. Available until stock lasts.
Module integrated with door speaker and colour camera with 6 white light LED's, no button for door station Matrix series. Plate is in stainless steel, it allows composition in digital video door entry systems. IP45 and IK09 protection degrees are guaranteed. Available until stocks last.
According to Matrix door station series, antivandal flush mounted keypad for access control with buttons and front plate in stainless steel (IP45). Two relays for lock opening, access control or other functions. Programming and code composition is made through the front plate. Keypad deactivation with increasing time intervals (max 25 secs) in case of wrong combination. The 12 programmable codes are composed from 1 to 8 digits for each relay. Programmable timer from 1 to 99 secs. in monostable working or bistable operation. Relays can be activated by pressing an additional Exit button. For outdoor use.
PTZ Day&Night camera. Resolution 460 TV lines, minimum illumination 0.01 lux, zoom 27x optical and 8x digital. Continuous (360°) horizontal swing and 0-90° vertical. Pre-set, group, tour, swing park functions are available for a periodical surveillance of different areas. Provided with external anti-condense housing. Control by AT6SD console on RS485 twisted line. Product not available any more.
PTZ color camera. Resolution 470 TV lines, minimum illumination 1 lux, zoom 23x optical and 8x digital. Continuous (360°) horizontal swing and 0-90° vertical. Pre-set, group, tour, swing park functions are available for a periodical surveillance of different areas. Provided with external anti-condense housing. Control by AT6SD console on RS485 twisted line. Product not available any more.
Color camera with 1/3"" CCD sensor. Resolution 330 TVL provided with RJ45 connector for video transmission on TCP/IP network. Provided with management software. It is possible to control: 4 or 16 devices, the quality and the speed of connection, record (on PC) also through Motion Detector function. MPEG4 compression algorithm. Digital input/output port, RS485, RS232 for external devices control are available on the rear panel. Provided with bracket and without lens. NO MORE AVAILABLE IN STOCK
Video transmitter for TCP/IP network. It allows to control the video signal from any CCTV processor (also for an existing system) from remote PC via Internet with quality and speed transmission adjustable. Provided with software for the control of 4 or 16 devices, recording on remote PC (also trhough Motion Detector function). MPEG4 compression algorithm. Digital with input/output, RS485 and RS232 for the control of external devices are available on the rear panel. NO MORE AVAILABLE IN STOCK
Receiver for TXTW on waterproof box (IP66). It converts the balanced signal (on twisted line) to unbalanced signal suitable for coaxial cable. Inner trimmers allow to equalise and compensate the effects of the transmission line. Out of production.
Converts the video signal from coaxial cable (unbalanced) to balanced signal suitable for twisted lines transission. Maximum distance 1000 meters. To be used together with RXTW receiver. On waterproof box (IP66). Out of production.
12-30mm adjustable varifocal lens. Automatic iris with drive (Video) type. Product not available any more.
