IP waterproof camera with 2.8-12mm varifocal lens suitable for outdoor installation (IP66) with PoE. Thanks to Sony 3.1 Megapixel sensor, it can capture real time (25Fps) high definition pictures, while the network connection and P2P support allow to make complex systems with a completely digital signal handling (also ONVIF protocol is supported). It has 2 video streaming, which can be configured independently for various applications, while pictures can be saved also via FTP or sent via e-mail up on event. For night vision a system of 4 IR array led's and mechanical ICR allows good picture quality for reasonable distances. Product available until stock lasts.

IP dome camera with 2.8-12mm varifocal lens suitable for outdoor installation with PoE. Thanks to Sony 3.21 Megapixel sensor, it can capture real time (25Fps) high definition pictures, while the network connection and P2P support allow to make complex systems with a completely digital signal handling (also ONVIF protocol is supported). It has 2 video streaming, which can be configured independently for various applications, while pictures can be saved also via FTP or sent via e-mail up on event. For night vision a system of 21 IR led's and mechanical ICR allows good picture quality for reasonable distances. Product available until stock lasts.

Compact IP dome camera with 3.6mm fixed lens suitable for indoor installation with PoE. Thanks to Sony 3.1 Megapixel sensor, it can capture real time (25Fps) high definition pictures, while the network connection and P2P support allow to make complex systems with a completely digital signal handling (also ONVIF protocol is supported). It has 2 video streaming,  which can be configured independently for various applications, while pictures can be saved also via FTP or sent via e-mail up on event. For night vision a system of 24 IR led's and mechanical ICR allows good picture quality for reasonable distances. Product not available any more.

Bullet Day&Night camera with 2.8-12mm varifocal lens and waterproof case (IP66). The new CMOS SONY sensor 1/2.9" of 2.1MP joined with AHD technology provides pictures of resolution up to 1080p. The 4 IR array led's (or 42 standard IR led's according to versions) and removable ICR filter guarantee a good picture quality even in low light conditions. This camera can be even set for traditional analogue CVBS output for compatibility with previous recording systems or to CVI/TVI signal output for compatibility with third party recorders. Product available until stock lasts.

Mini bullet Day&Night camera with 3.6mm fixed lens and waterproof case (IP66). The new CMOS SONY sensor 1/2.9" of 2.1MP joined with AHD technology provides pictures of resolution up to 1080p. The IR led's and removable ICR filter guarante a good picture quality even in low light conditions. This camera can be even set for traditional analogue (CVBS) or CVI/TVI signal output. Product not available any more.

Totally Made in Italy, Alba stands out for its high-level design conceived for the best Farfisa technologies. Modularity and flexibility, concealed structural elements, luminous icons and attention to accessibility make Alba the line of entry door stations that gives you the composition you need with maximum ease of installation, the top of usability even in maintenance and updating.

 The series consists of standalone elements that coexist in compositions: audio/video- or only audio button module (elegant and compact, allows up to 4 calls with a single module), module for digital keypad or access control or expansion for MyCom system, display module or proximity reader module. Accessories and various additional elements complete the range.

 Alba stands out for its sensitivity and attention to the disabled: the wide angle of the camera pushed to allow people in wheelchairs to be framed, it can be equipped with a specific coil to facilitate compatibility with hearing aids for hearing impaired users, printing on the button of call is in relief in Braille, for the recognition by the blind, the flashing signal of forwarded call helps the hearing impaired users.

 The front plate is made of anodised aluminum with brushed finish, color camera with a 2.3 mm focal length and  wide-angle lens, voice prompt multi-language, activable and manageable via Bluetooth, camera-integrated loudspeaker and microphone in the lower part not visible, particularly protected internal mechanics and electronics, therefore weatherproof, IP55 and IK08. The 3 LEDs light up the icons to indicate the status: call sending, busy, active conversation, door lock release. Alba has 2 independent outputs for lock activating and other loads, assembly is simplified and speed.

Available the new art. CV1000AB Alba module, with which IP EVO system offers modular, elegant and compact-shape door station for installations with few users. You can add art. CT2138AB additional call module.

Alba on Duo System is self-powered with automatic address learning. Alba manages the "Duo extended" range system, so it can be used as the main external unit of the systems for up to 20000 users and with very long distance between external and internal units. With built-in or surface mounting, Alba is also suitable for renovations thanks to compatibility with Farfisa series and others.

Alba can be programmed and managed through Bluetooth technology for an higher confort, speed, reliability and usability for the installer and for the end-user too.

If integrated with the XE2922 board, Alba can be connected with the apps Farfisa Smart Access and Farfisa Smart Dial for contactless access control.

WATCH THE VIDEO

GO TO THE TOOL "NAME PLATES"

Farfisa conceived a short and emotional story, entirely developed with motion graphics, with which he tells history, resources, technologies and visions that characterize the heart and essence of the brand.

FARFISA MOVIE

Farfisa conceived a short and emotional story, entirely developed with motion graphics, with which he tells history, resources, technologies and visions that characterize the heart and essence of the brand.

A direct, simple and evocative way to explore and breathe the design of the products also: from the first intercom designed and produced in 1967 to the shapes of ALBA, the last jewel born in Farfisa home

Today Farfisa headquarter welcomes you with new shapes: reception and meeting room that design spaces and functions dedicated to the comfort of the relationship and real contact with our products.

Farfisa celebrates 50 years of presence on international markets with new awareness, new strategies and new communicative energy. First of all, the restyling of our brand, seed and flag of our industrial essence: the action has retrieved the original shapes of our first logo by reworking them according to modern, technical and institutional visual outlines while at the same time stabilizing our two most important competitive content: The true Made in Italy that characterizes the entire design and production cycle and our historical heritage.